Manufacturing Consent - 1408 Words

Manufacturing Consent Questions – Avery Reyner – September 30, 2012 Manufacturing Consent is a technique of control. Noam Chomsky was first introduced to this concept from an author named Walter Lippmann who wrote about ‘Manufacturer of Consent.’ Chomsky augmented his concept to Manufacturing Concept and the philosophy has become so popular it later became a documentary film produced by two Canadians. Noam Chomsky has been called ‘arguably the greatest intellectual alive (Fox, 1998) by the New York Times as he not only is a very outspoken professor, he is also an American linguist, philosopher, cognitive scientist, logician, historian, political critic and activist. The information in this essay was obtained from his video called:†¦show more content†¦The second group is the other 80% of the population. They don’t think or pay attention as astutely as do the first 20% and their opinions and thoughts can be somewhat manipulated. According to Chomsky, their main function is to follow orders. The consent of the people is the consent, or opinions being manufactured by the government, and the political system. Their intentions are to manufacture the consent of the people and make sure that their choices and attitudes are altered in such a way that they will always do what is in the governments best interest, which often is the same interest of corporate companies in America. This is what Chomsky meant by propaganda. The methodology Chomskys used in studying Manufacture of Consent is called the ‘Propaganda Model’ and it is an institutional analysis of the major media. The major media he studied consisted of The New York Times, The Washington Post and major television channels. Chomsky evaluated them because he believes that ‘ by selection of topics, by distribution of concerns, by emphasis and framing of issues, by filtering of information, by bounding of debate within certain limits, they determine, they select, they shape, they control, they restrict -- in order to serve the interests of dominant, elite groups in the society.’(Chomsky, 1992) He also believes that by analysing the institutions it is very obvious they have a goal to make money and the way to make money with a newspaper is to sellShow MoreRelatedAnalysis Of Major Themes Of Chomsky s Manufacturing Consent948 Words   |  4 Pagesin Chomsky’s Manufacturing Consent As a society, us Americans tend to put stock in varied forms of mass media. From Disney to Gannett we grow up with selective views of the world and shaped opinions based on TV ratings. There are many theories on hegemony in American society. Dr. Noam Chomsky, a preeminent authority in 20th century political philosophy, discusses how news media is a tool for disseminating propaganda provided by the powerful elite in his book Manufacturing Consent. He discussesRead MoreManufacturing Consent1486 Words   |  6 PagesAccording to the theories presented in Marc Achbar and Peter Wintonicks thought provoking documentary Manufacturing Consent: Noam Chomsky and the Media, if the ideas in this reaction paper were to be published as a review piece for The Collegian, much of what I would say may well be censored. On the other hand, an even worse case scenario would be that my ideas would be regarded as irrelevant because the students of Penn State have been systematically numbed into apathy by the mind-control tacticsRead MoreManufacturing Consent by Edward S. Herman and Noam Chomsky Essay718 Words   |  3 Pages Journal on The Manufacture of Consent nbsp;nbsp;nbsp;nbsp;nbsp;In Noam Chomskys film I have learned quite a few things about life in a democratic society. This film has made think in a three dimensional way for whom is really right, Noam Chomsky or those who he calls quot;Elitesquot;. I have come to the conclusion that Noam Chomsky is right, for his claim is very convincing which is that the media is controlled by the elites who determine what the public should know. How exactlyRead MoreWhat Does Manufacturing Consent Mean?924 Words   |  4 Pages1) What does manufacturing consent mean? †¢ Noam Chomsky separates his surroundings in 2 groups. They are people that make decisions and have control over the politics, the culture and education of society. The 20% include big news corporations, for example he discusses The New York times quite a few time throughout the film. The remaining 80% are the followers. That is what most of the world is. These are people that either do not know, or do not care about the truth. Actually, the 80% has an importantRead MoreSm Ch 17 Essay10973 Words   |  44 PagesEx. 17.6 B. Ex. 17.7 B. Ex. 17.8 B. Ex. 17.9 B. Ex. 17.10 Topic Accounting for overhead Transferring costs Overhead application rates Actual and applied overhead Selecting a cost system Applying direct labor Applying direct materials Recording manufacturing costs Selecting activity bases Activity-based costing Exercises 17.1 Topic Accounting terminology 17.2 17.3 17.4 17.5 Understanding cost flows Job costing journal entries Overhead cost drivers Real World: Granite Construction, Inc. Cost classificationsRead MoreManagement Information System (Mis) Research Paper2785 Words   |  12 PagesManagement Information System (MIS) Research Paper What is manufacturing? The production of tangible things planned to be sold or leased for final use or consumption or the production of tangible things pursuant to a contract with the Federal Government. This can be done by mechanical, physical or chemical means. Plants, factories and mills that use power-driven machinery and equipment are typical in the manufacturing industry. However, it also includes home-based businesses that make hand-craftedRead MoreThe Nuremberg Of Trial ( 1946 )1127 Words   |  5 Pages the Nuremberg code was created to protect participants from ethical violations. Ethical issues Rationales for choosing specific ethical violation(s). The first ethical issue on this study is that the participants did not receive an informed consent with full disclosure of the potential risk and discomforts of participating in this study. The participant did not have the right to withdraw from the study. The researchers conducted experiments that were unsafe for the participant s such self-inflictingRead More10 Principles Regaarding Ethical Clinic and Set of Guidelines on Clinical Research1071 Words   |  5 PagesNuremberg Code is a set of 10 sophisticate principles regarding ethical clinical research on human being (Grodin, 1994). It is mainly for protection of subjects’ human right (Shuster, 1997), such as compulsory of informed consent and the equal authority of subjects as the physician-researcher to end the experiment. 1.2 Helsinki Declaration (1964) Helsinki Declaration is a set of guidelines on clinical research for physician as their responsibility toward protection of their research subjectsRead MoreLemmings of the Media Essay1205 Words   |  5 Pagesvalid knowledge of todays issues and policies? Are we being shielded from the absolute truths on big issues of our government? Can the media we absorb everyday be trusted to inform us of the complete scope of view on any given subject? In Manufacturing Consent, Noam Chomsky and Ed Herman present what they call a Propaganda Model which ties in with the elitist theory of government and how a select few people manipulate what the public sees in the media and how the public should think. In the PropagandaRead MoreIch Gcp Guidelines19159 Words   |  77 Pages...................13 Investigational Product(s)......................................................................................14 Randomization Procedures and Unblinding .........................................................15 Informed Consent of Trial Subjects.......................................................................15 Records and Reports...............................................................................................18 4.10 Progress Reports..............

Racism Is A Problem Of The Country We Live - 1193 Words

Tyler Thomas ENGL 1213 Michael Sloyka February 8, 2015 There’s Always Two Sides to Every Story Racism has and unfortunately will always be a problem in the country we live in. Although we’ve come a long way, numerous issues of prejudice and racial discrimination still plague the country. Some people believe that the situation is gradually getting better, while others see it getting progressively worse. One thing that is for sure is that certain stories of the issue become popular and spark outrage among people. This has become more common recently, especially with stories of police brutality; more specifically, white police officers, and African Americans. The situation has resulted in deaths, injuries, riots, civil outrage, and many see†¦show more content†¦The circumstances of the shooting and the protests and civil outrage that resulted from the incident received considerable attention in the U.S. It ignited a vigorous debate about law enforcement s relationship with blacks, and the question of whether policeman were using excessive force nationwide. Shortly before the shooting, it was said that Brown robbed a convenience store, stole a carton of cigarettes, and pushed the clerk trying to prevent brown form exiting. Surveillance from the store was later by law enforcement released during the investigation of the incident. This also sparked outrage, especially from Brown’s family: â€Å"Michael Brown’s family is beyond outraged at the devious way the police chief has chosen to disseminate piece mil information in a manner intended to assassinate the character of their son, following such a brutal assassination of his person in broad daylight (Huffingtonpost.com).† During a press conference Wilson stated he did not know Brown was a robbery suspect when he stopped him. Brown was seemingly stopped because he was walking in the middle of street and blocking traffic. Ferguson police said a physical altercation occurred between the two men prior to the shooting. Johnson, the man that was with Brown, said Brown was unarmed and had his hands up when he was shot. This is highly disputed as many eye witnesses told accounts of what they had seen.

The Concept of 3D Printing-Free-Samples-Myassignementhelp.com

Question: Discuss about the Concept of 3D Printing. Answer: Introduction In the world of technological advancements, the concept of the 3D printing has changed to the concept of reality from being theoretical. The concept of the design of the product with it being very much cheap and various models which are easily available the technology is being widely adopted in many areas (Campbell et al., 2017). Moreover, it has been very much common feature at every home. The main aim of the report is to bring into consideration the concept if the 3D printing as an additive manufacturing. It reports mainly analysis the concept of whether the concept is suited better for low volume or high volume types of production. The situation and relating to it, its value is mainly analysed along with the concept of forecasting on the 3D printing. At the end of the report the ways in which the concept of the 3D printing can make the conventional manufacturing outdates along with its direct effects are taken into consideration. 3D printing being called additive manufacturing 3D printing is mainly called an additive manufacturing due to the factor that the process can be easily be implemented in the application which are used for the creation of the 3D object from the digital files. It can be stated that 3D objects can only be created by the implementation of additive processes that mainly include layering of the successive layer of the material until the object is considered to be created fully. Taking into consideration the successive layers, the layers can be seen as a very thin cross section slice section of the eventual object. The concept of the subtracting manufacturing is not taken into consideration that mainly include hollowing out or the cutting out of the material from a piece which is complete which is related to the material of metal or plastic through the use of milling machine. The American society of testing and material mainly introduced the additive manufacturing which mainly lead to the development of seven standards that could be very much helpful in order to classify the additive manufacturing into mainly seven categories. These processes are listed below: Material extrusion: There are mainly three technologies which can be related to its which are FFF, FDM and contour crafting and this can be used to implement and add materials and the creation of the object which are represented as an additive evidence. Direct deposition of energy: This concept is mainly used in the manufacture of high tech industry and applications. It comprises of deposits of the metal powder on the surface and the multi- axis hand of the robotics which is connected to the nozzle which is used to the creation of the object (Weller, Kleer Piller, 2015). Powder bed fusion: there are mainly two types of additive process that are used under the process in order to create 3D objects which includes the SLS (selective laser sintering), DMLS (Direct metal laser sintering). Binder jetting: in this section liquid binder and material of powder base are used. In the chamber this powder is mainly spread equally and the addition of glue is made which mainly strengthen the objects. Material jetting: the basic working principle is related very much similar to the concept of the inkjet paper printer in which the material is basically applied through the use of a small nozzle. The only difference which is applied to the concept is that application is mainly done in a layer by layer manner in order to build the 3D object and after the process it is mainly hardened by the exposure of the UV light (Loo, Chua Pumera, 2017). Sheet lamination: bounded by external forces it mainly involves material which are in the shape of the sheet.Vat photo Polymerization Figure 1: (Vat photo Polymerization) (SOURCE: Weller, Kleer Piller, 2015). The above picture clearly describes the main working concept of the Vat Photo Polymerization in which is container is mainly filled with photopolymer resin after which it is mainly harden with the application of UV source of light. On the other hand, there are three process which are involved in the concept which can be stated to justify the factor of additive manufacturing that mainly include DLP (Digital light Processing), CLIP (continuous liquid interface production) and SLA (stereolithographic) (Grice et al., 2016). Suitable for High or low volume of production The conventional process which is related to the concept of moulding injection are utilized mainly for the wide scale manufacturing. Hence it can be stated that it is very much suited for volume production which is high. It can be stated to the reshaping of the development and the product manufacturing (Weller, Kleer Piller, 2015). By the implementation of the process of 3D printing, the designers and the engineers are able to save money. Taking into account the save of time, it can be regarded as very much beneficial. Regarding the low volume manufacture, the labour intensive and the portion of the cost has been the tooling production. The printers which are 3D are able to remove the expense part since it eradicates the necessity for the production of the tools that has been cutting the lead time and the labour (Ju et al., 2017) Regarding the high volume manufacture, there are many benefits that are inherent to the process. this mainly involve the capacity which is related to the production of the parts which are custom with no cost of upfront virtually. Moreover, it can be stated to be capable of producing the shape that are uneconomical and impossible (Radenkovic, Solouk Seifalian, 2016). Situation in which 3D printing is valuable The situation in which the 3D printing is most valuable mainly depends on how the term value is defined (Xing, Zheng Duan, 2015). The largest market of the 3D printing is currently based on application of the customer has been the hearing aids. The ear hearing aids are mainly created through the implementation of the 3D printing. The plastic implants and the implants have been possessing potentially higher orders in the market. Taking into consideration other unrealized market scenario which is related to the 3D printing cartilage, can be considered to be decide away from the commercialization. The products which are related to custom fit has been the outstanding project which is related to business for those customer who have been searching for the 3D printing. The advantage which is achieved from the concept is that it mainly fits the customer demand the way they need it (Ju et al., 2017) Forecast of 3D printing The leading research which is being conducted is mainly in the field of whether to conduct the research according to in house capabilities, the reason and outsourcing. Taking into account the organization which are committed for the 3D printing the outcomes has been the part of ensuring that the me path of the peers and the field of various challenges for the adoption (Xing, Zheng Duan, 2015). A competitive advantage is mainly achieved by the usage of the security printing in order to achieve manufacturing of the product which has been coming out of the current competitive advantage. Making traditional manufacturing obsolete There have been ways in which the 3D printing aspects is obsoleting the concept of the traditional manufacturing. The concept of the 3D printing has been speeding the design which is related to the product and the overall speed of the business. Moreover, it has been creating a concept of object dense which is devoid of discernible layering and the concept of monolithic. Moreover, it can be stated that the technology directly provides greater freedom in the design and the innovation which is related to the spur. The technology has been producing the project in a fast and comparatively much costlier (Xing, Zheng Duan, 2015). Effect The implementation has been providing the concept of the manufacture as a service tool, which is very much same as the software as a service. The reduction of the waste is also encountered and the development of the resources which are being used in the concept. The left over material after the implementation of any process can be used in different sectors and the reuse factor is taken into account. Conclusion The concept of the 3D printing should be included into any organisation and they should gain in hand knowledge of how these technologies can be used in order to achieve benefit from them. The organisation on the other hand need to identify the low volume product and altering them fast as the market dynamics are changed. Recommendation Recommendation 1: Printing on curved surfaces which are on multiple planes should be avoided. Recommendation 2: Enclosed hollow features creation should be avoided. Recommendation 3: The smoothening of the steeping edges can be made many times with the use of sand paper. Recommendation 4: The disclosing of the support material in the hollow should not be disclosed. This is due to the factor that soluble solutions may not reach the materials. References Campbell, T., Williams, C., Ivanova, O., Garrett, B. (2017). Could 3D printing change the world. Technologies, Potential, and Implications of Additive Manufacturing, Atlantic Council, Washington, DC. Grice, N., Christian, C., Nota, A., Greenfield, P. (2016). 3D Printing Technology: A Unique Way of Making Hubble Space Telescope Images Accessible to Non-Visual Learners. Journal of Blindness Innovation Research, 5(1). Ju, Y., Xie, H., Zheng, Z., Lu, J., Mao, L., Gao, F., Peng, R. (2017). Visualization of the complex structure and stress field inside rock by means of 3D printing technology. Chinese science bulletin, 59(36), 5354-5365. Lee, J. Y., Tan, W. S., An, J., Chua, C. K., Tang, C. Y., Fane, A. G., Chong, T. H. (2016). The potential to enhance membrane module design with 3D printing technology. Journal of Membrane Science, 499, 480-490. Loo, A. H., Chua, C. K., Pumera, M. (2017). DNA biosensing with 3D printing technology. Analyst, 142(2), 279-283. McMenamin, P. G., Quayle, M. R., McHenry, C. R., Adams, J. W. (2014). The production of anatomical teaching resources using three?dimensional (3D) printing technology. Anatomical sciences education, 7(6), 479-486. Moon, S. K., Tan, Y. E., Hwang, J., Yoon, Y. J. (2014). Application of 3D printing technology for designing light-weight unmanned aerial vehicle wing structures. International Journal of Precision Engineering and Manufacturing-Green Technology, 1(3), 223-228. Radenkovic, D., Solouk, A., Seifalian, A. (2016). Personalized development of human organs using 3D printing technology. Medical hypotheses, 87, 30-33. VAT Photopolymerisation | Additive Manufacturing Research Group | Loughborough University. (2017). Lboro.ac.uk. Retrieved 18 October 2017, from https://www.lboro.ac.uk/research/amrg/about/the7categoriesofadditivemanufacturing/vatphotopolymerisation/ Ventola, C. L. (2014). Medical applications for 3D printing: current and projected uses. Pharmacy and Therapeutics, 39(10), 704. Weller, C., Kleer, R., Piller, F. T. (2015). Economic implications of 3D printing: Market structure models in light of additive manufacturing revisited. International Journal of Production Economics, 164, 43-56. Xing, J. F., Zheng, M. L., Duan, X. M. (2015). Two-photon polymerization microfabrication of hydrogels: an advanced 3D printing technology for tissue engineering and drug delivery. Chemical Society Reviews, 44(15), 5031-5039.